Navegando por Palavras-chave "polyetherimide"

Agora exibindo 1 - 2 de 2
  • Imagem de Miniatura
    Item
    Acesso aberto (Open Access)
    Polymer Nanocomposites for Hydrogen Storage
    (Amer Inst Physics, 2017) Beatrice, Cesar A. G.; Oliveira, Amanda D.; Passador, Fabio R. [UNIFESP]; Pessan, Luiz A.
    Hydrogen is considered to be a clean, economical and safe renewable energy source that would be ideal to replace fossil fuels, because it is light, highly abundant and its oxidation product (water) is environmentally benign. However, hydrogen is easy to burn (the chemical energy per mass of hydrogen is at least three times larger than that of other chemical fuels), which has the risk of fire and explosion. The problems of transportation and storage restrict the application of hydrogen energy, which has become a key factor in the development and utilization of hydrogen energy. This gas adsorbs at solid surfaces depending on the applied pressure and temperature. For storage purposes in mobile applications, the adsorption of hydrogen has been studied mainly on carbon species, but light and reasonably cheap materials of high surface area should prove to be attractive as well. Porous material is a very promising hydrogen storage material, which stores the gas in the form of molecules at low temperatures and compresses hydrogen into the holes effectively. The purpose of this work was to develop a hybrid porous materials consisting of sulfonated polyetherimide matrix with aluminum nanoparticles and faujasite type zeolite. Dilute solutions were first prepared under stirring at room temperature and the solutions were dried under vacuum. The hybrids were analyzed by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and hydrogen sorption measurements. The addition of aluminum decreased the glass transition temperature of the hybrids when compared to the sulfonated polymer and the TEM images showed that simply physically mixture occurred between polymer and metallic nanoparticles. Hydrogen sorption tests showed an increase in the amount of hydrogen in the presence of zeolite.
  • Nenhuma Miniatura disponível
    Item
    Somente Metadadados
    Processing, thermal and mechanical behaviour of PEI/MWCNT/carbon fiber nanostructured laminate
    (Iop Publishing Ltd, 2017) Santos, L. F. P.; Ribeiro, B. [UNIFESP]; Hein, L. R. O.; Botelho, E. C.; Costa, M. L.
    In this work, nanostructured composites of polyetherimide (PEI) with addition of functionalized multiwall carbon nanotube (MWCNT) were processed via solution mixing. After processing, these nanocomposites were evaluated by thermogravimetry (TGA), dynamic-mechanical analysis (DMA), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Subsequently, the nanocomposite was processed with carbon fibers by using hot compression molding. In order to evaluate interlaminar fracture strength, the processed laminates were mechanically evaluated by interlaminar shear strength (ILSS) and compression shear test (CST). Also, the Weibull distribution was employed to help in the statistical treatment of the data obtained from the mechanical tests. With regards to the fracture of the specimens, optical microscopy was used for the evaluation of the material. The addition of 1 wt% of MWCNT in the polymer matrix increased both thermal stability and viscoelastic behavior of the material. These improvements positively impacted the mechanical properties, generating a 16% and 58% increase in the short-beam strength and apparent interlaminar shear, respectively. In addition, it can be verified from morphological analysis of the fracture a change in the failure mode of the laminate by the incorporation of MWCNT. This behavior can be proven from CST test where there was no presence of the shear force by compression.